Home ] Projects ] Hevle Classic ] [ Rotec Radials ] Accessories ] Choppers ] [Hevle Vintage]

Hevle Aviation can assist in the installation of the Rotec radial in your Airplane

E-mail for pricing and availability  hevleaviation@aol.com             

How about a 150 HP option?  Order yours Today, call or e-mail us.  2005 price $19,500 w/ shipping anywhere in the continental US  In stock now!!!! (one available at this price) Call for other shipping quotes.

Rotec R3600 Specifications

  • Diameter = 850mm (33.46") its 40mm larger than the diameter of the R2800
  • Depth the same as the R2800 = 640mm (25.2")
  • Modified prop hub to accommodate the additional power and torque.
  • Weight has been established. Including all bolt on accessories and the dual exhaust collector ring the weight came in at 123Kg (270.6lbs)
  • HP may be 150+HP (yet to be determined)
  • Will have a 3:2 PSRU for additional torque (resulting in 150+HP of usable power when compared to the output of a "Flat" engine).
  • What comes as Standard with every R3600 Purchased:

     

    Rotec R2800 Specifications

    Current price is  $13,750 plus shipping, around $1100 by air (10days) and $800 by sea (6 weeks) 

    The Rotec R2800 is comprehensive and yet conservative by design, and has many desirable features and specifications:

         Total swept volume of 2800cc (172ci). 110HP @ 3700 RPM geared. Total engine diameter is 810mm (31.9"). Dry Weight is 108kg (220 lbs) complete with bolt on engine accessories. Propeller hub is driven via precision ground and  matched taper. Propeller flange specs are standard SAE # 2 (Same as Rotax 912 Series)

    Gearing is via a PSRU (Planetary Speed Reduction Unit) at a ratio of 3:2 Engine rpm:Prop rpm.

    Propeller / RPM Fixed 76" Diameter x 42"Pitch @ 2,400 RPM.

         Fully machined aluminium crankcase and heads.  Steel 4140 billet crankshaft, nitride hardened and ground, running on two large anti-friction roller bearings, propeller support and end thrust controlled by single deep groove ball bearing (all standard practice). Steel 4140 master and link rods deeply I beam sectioned and plain bushed, all lubricated by mains oil pressure. Steel 4140 cylinders precision honed to a  perfect finish and exact tolerance.

         The all important ignition system utilises two auto type spark plugs per cylinder independently fired by both a single self-energized magneto and Hall-effect 12 volt electronic ignition system, virtually eliminating total ignition failure when used in tandem.  Timing is fixed at 25 degrees BTDC.

         Electric 12volt starter motor (rear mounted) including built-in solenoid for reliable engagement and cranking.

         35amp alternator (small and also rear mounted) with built in voltage regulator.

         Single Bing 40mm constant depression carburetor offering excellent automatic altitude compensating mixture control for an incredibly smooth delivery of power. Fuel supplied by engine driven mechanical fuel pump, an electric fuel pump (not included) is recommended for back up. Both fuel pumps are configured in series.

      Dry sump lubrication via geared oil pressure and primary and secondary scavenge pumps. Auto style spin on oil filter are incorporated in the design.

         Conventional valve train (two per cylinder) incorporating classic dual row cam rings and roller tappets for smooth valve movement via pushrod and 1:1 rocker transmission (all oil pressure lubricated).

         All cams and bearing surfaces are nitride hardened and precision ground to exact tolerances.

         Minimum octane 97 RON or 100LL aviation or high octane mogas are recommended. Compression ratio of 8.5 : 1 is standard.

    Fuel consumption: Avgas 100LL or high octane mogas: 22 ltrs/hour(5.8 gal/hr.) @ 80% Power

         Recommended TBO of 1000 hours. All engines come with a 12 month 200 hour warranty from date of purchase, whichever comes first. NOTE ALL WARRANTY CLAIMS TO BE ASSESSED AND CONDUCTED BY Rotec ENGINEERING PTY LTD (SHIPPING NOT COVERED BY WARRANTY).

      Side and rear views:



     

    Rotec Engineering Pty Ltd                            
     

    Manufactured In Australia